Spindel-Positionsanzeigen
Übersicht "Spindel-Positionsanzeigen"
Abbildung / Image |
![]() |
![]() |
![]() |
![]() |
Datenblatt / Specifcation |
n150.pdf [80 KB] |
n140.pdf [66 KB]
n140e.pdf [65 KB] |
n141.pdf [66 KB]
n141e.pdf [66 KB] |
n142.pdf [81 KB]
n142e.pdf [80 KB] |
Typ / Type |
N 150 | N 140 | N 141 | N 142 |
![]() |
![]() |
![]() |
![]() |
|
Merkmal / Feature |
Manuelle Spindelverstellung / Manual spindle positioning |
Manuelle Spindelverstellung / Manual spindle positioning |
Manuelle Spindelverstellung / Manual spindle positioning |
Dezentrale, motorische Spindelverstellung / Motive spindle positioning |
Versorgungsspg. / Supply voltage |
24 VDC | 24 VDC | 24 VDC | 24 VDC |
Anzeige / Display |
zweizeiliges LCD Soll- u. Istwert hinterleuchtet / Two-line LCD running and target value backlight |
zweizeiliges LCD Soll- u. Istwert hinterleuchtet / Two-line LCD running and target value backlight |
zweizeiliges LCD Soll- u. Istwert hinterleuchtet / Two-line LCD running and target value backlight |
zweizeiliges LCD Soll- u. Istwert hinterleuchtet / Two-line LCD running and target value backlight |
Auflösung / Resolution |
1.440 Schritte/U. und ±4.096 Umdreh. / 1.440 steps/turn and ±4.096 turns |
2.304 Schritte/U. und ±4.096 Umdreh. / 2.304 steps/turn and ±4.096 turns |
2.304 Schritte/U. und ±4.096 Umdreh. / 2.304 steps/turn and ±4.096 turns |
2.304 Schritte/U. und ±4.096 Umdreh. / 2.304 steps/turn and ±4.096 turns |
Schnittstelle / Interface |
RS485 ASCII-Protokoll |
RS485 ASCII-Protokoll |
RS485 ASCII-Protokoll |
RS485 ASCII-Protokoll |
Hohlwelle / Hollow shaft |
Ø 14 mm | Ø 25 mm | Ø 25 mm | Ø 25 mm |
Besonderheiten / Special features |
Anzeige vorne oder an der Schräge / Display frontside or on the chamfer |
- |
Umschalttaste für Ist-Wert / Werkzeugradius / Switchover key for actual pos. / tooling radius |
Steuerausgang für Motor / Control output for drive |
![]() |
||||
![]() |
||||
![]() |
Letzte Änderung am Donnerstag, 24. September 2020 um 14:28:40 Uhr.